Sale!

The Design – Ansys CFX Transient Simulation | Water Liquid

$46.99

The motion of objects in the fluid has always been interesting for scientists. Although the movement of objects in the air has been more considered than before, this movement has been reviewed in different fluids. Falling caused by gravity is also one of the most important moving modes. Falling objects in different fluids can be a great help in analyzing this behavior. Water is one of the most important fluids that need to be considered.

In this analysis, it has been tried to simulate and analyze the fluid flow around two cubes falling into a fluid in transient mode, using Ansys CFX software.

Category:

The Design – Ansys CFX Transient Simulation | Water Liquid

The motion of objects in the fluid has always been interesting for scientists. Although the movement of objects in the air has been more considered than before, this movement has been reviewed in different fluids. Falling caused by gravity is also one of the most important moving modes. Falling objects in different fluids can be a great help in analyzing this behavior. Water is one of the most important fluids that need to be considered.

In this analysis, it has been tried to simulate and analyze the fluid flow around two cubes falling into a fluid in transient mode, using Ansys CFX software.

Geometry & Grid

The geometry required for this analysis was generated by Ansys Design Modeler software. The meshing required for this analysis was also generated by Ansys Meshing software. The mesh type used in this analysis is unstructured. The total number of volume properties for this geometry is 2.9473e+009 mm³.

Model

In this analysis,  a steady-state analysis type was used to obtain the results to check the fluid flow. In this analysis, non-buoyant models have been used and stationary domain motion has also been activated in this analysis. In this analysis, a k-Epsilon model was used to study the water flow and thermal energy fluid models of heat transfer.

Boundary Condition

In this analysis, the flow inlet, which only includes the water, is defined as two velocity inlet. The normal speed value of mass and momentum velocity inlet 1 is 0.1 [m s^-1] and the normal speed value of mass and momentum velocity inlet 2 is 0.4 [m s^-1]. The turbulence of the design modeler is set as a medium with an intensity equal to 5 %. The heat transfer is considered a static temperature. The static temperature of heat transfer is 50 [C].

In this analysis,  static pressure has been used to determine the mass and momentum in the material fluid and particle basic settings of the design modeler. And the relative pressure value of mass and momentum is 100000 [Pa].

Discretization of Equations

In this analysis, high-resolution is used for the advection scheme of the basic settings. In this analysis, the first-order is used for turbulence numerics. In this analysis, the residual type of convergence criteria is RMS and the residual target of convergence criteria is 1.E-4.

The results are presented as velocity contours as well as streamlines.

The Design Services

We also accept all CFD projects using ANSYS Fluent and ANSYS CFX. Our workshop has gathered experts in different engineering fields so as to ensure the quality of CFD simulations. One of our objectives is to boost the use of powerful computational fluid dynamics methods and also teach the engineers and those who seek professional knowledge in CFD.

ِDoing CFD projects will be faster and easier with our services. Call us for training in CFD applications and CFD packages. Our professional CFD engineers offer you professional consultation and technical supports for your academic CFD projects and industrial CFD projects. We offer you CFD learning, CFD project by ANSYS Fluent and ANSYS CFX, CFD consulting by ANSYS Fluent and ANSYS CFX, CFD service by ANSYS Fluent and ANSYS CFX, ANSYS Fluent and ANSYS CFX project, ANSYS Fluent and ANSYS CFX thesis, ANSYS Fluent and ANSYS CFX simulation, ANSYS Fluent and ANSYS CFX paper regeneration, ANSYS Fluent and ANSYS CFX academic project, ANSYS Fluent and ANSYS CFX industrial project, ANSYS Fluent, and ANSYS CFX research project, and low CFD Price. Moreover, we have years of experience in coordinating CFD projects. Therefore, we are ready to perform your CFD simulations in different engineering fields.

Reviews

There are no reviews yet.

Be the first to review “The Design – Ansys CFX Transient Simulation | Water Liquid”

Your email address will not be published. Required fields are marked *

error: Content is protected !!