Sale!

The Design – A Model for Coal Combustion and Gasification Simulation | ANSYS Fluent

$45.99

Combustion is the process of a combination of one or more combustible substances such as hydrocarbons with an oxidizing substance such as oxygen.

In this analysis, it has been tried to analyze the simulation of jet combustion chamber flow rates, using the ANSYS Fluent software.

Category:

The Design – A Model for Coal Combustion and Gasification Simulation | ANSYS Fluent

Combustion is the process of a combination of one or more combustible substances such as hydrocarbons with an oxidizing substance such as oxygen.

In this analysis, it has been tried to analyze the simulation of coal combustion and gasification simulation, using the ANSYS Fluent software.

Geometry & Grid

The geometry required for this analysis was generated by Ansys Design Modeler software. The meshing required for this analysis was also generated by Ansys Meshing software. The mesh type used in this analysis is unstructured. The total number of volume properties for geometry is 21606 m³.

Model

In this analysis, the laminar turbulence viscosity model is used to check the fluid flow.

Boundary Condition

The flow of primary coal input design modeler geometry for this analysis is considered as a mass flow rate and is 0.5 kg/s. The flow of secondary oxy input design modeler geometry for this analysis is considered as a mass flow rate and is 2 kg/s.

The flow output range is also considered as a pressure outlet for the flow output region and gauge pressure is equal to 0. The inner wall is also considered a Stationary Wall.

Discretization of Equations

In this analysis, high-resolution is used for the advection scheme of the basic settings. In this analysis, the second-order is used for turbulence numerics. In this analysis, the residual type of convergence criteria is RMS and the residual target of convergence criteria is 1.E-3.

The results are presented as temperature contours as well as volume rendering.

The Design Services

We also accept all CFD projects using ANSYS Fluent and ANSYS CFX. Our workshop has gathered experts in different engineering fields so as to ensure the quality of CFD simulations. One of our objectives is to boost the use of powerful computational fluid dynamics methods and also teach the engineers and those who seek professional knowledge in CFD.

ِDoing CFD projects will be faster and easier with our services. Call us for training in CFD applications and CFD packages. Our professional CFD engineers offer you professional consultation and technical supports for your academic CFD projects and industrial CFD projects. We offer you CFD learning, CFD project by ANSYS Fluent and ANSYS CFX, CFD consulting by ANSYS Fluent and ANSYS CFX, CFD service by ANSYS Fluent and ANSYS CFX, ANSYS Fluent and ANSYS CFX project, ANSYS Fluent and ANSYS CFX thesis, ANSYS Fluent and ANSYS CFX simulation, ANSYS Fluent and ANSYS CFX paper regeneration, ANSYS Fluent and ANSYS CFX academic project, ANSYS Fluent and ANSYS CFX industrial project, ANSYS Fluent, and ANSYS CFX research project, and low CFD Price. Moreover, we have years of experience in coordinating CFD projects. Therefore, we are ready to perform your CFD simulations in different engineering fields.

Reviews

There are no reviews yet.

Be the first to review “The Design – A Model for Coal Combustion and Gasification Simulation | ANSYS Fluent”

Your email address will not be published.

error: Content is protected !!